All 50 states and D.C.
Solar payback calculator
Estimate first-year production and bill savings, simple payback, and 25-year net savings for a rooftop solar system. Defaults come from public sources; every figure is editable.
Solar payback calculator
Choose a state to load a production estimate for a representative city and the latest EIA average residential electricity price. Then adjust the system size, cost, and incentives to match a quote.
Get real quotes
Compare installer quotes before you sign
This calculator is an estimate, not a bid. The U.S. Department of Energy’s Homeowner’s Guide to Solar covers roof suitability, installer qualifications, financing, and how to compare offers.
How this estimate is built
Gross cost is system size in watts times the installed cost per watt. Net cost subtracts the federal tax credit (if any) and the other incentives you enter. Year-1 production is system size times the annual kilowatt-hours per kilowatt. Each later year, production falls by the degradation rate and the electricity price rises by the escalation rate. First-year savings are year-1 production times the electricity price. Simple payback is the year when cumulative bill savings catch up to net cost. 25-year net savings are 25 years of bill savings minus net cost.
The model values every kilowatt-hour at the retail price you entered. That is a best case: it matches full retail net metering or complete on-site use. In many states, utilities now credit surplus generation at a lower avoided-cost or net-billing rate, which would stretch payback and cut long-term savings. The model also leaves out maintenance, inverter replacement, insurance, loan interest, and property tax.
Federal tax credit
The residential clean energy credit under Section 25D was 30% of eligible costs for systems completed from 2022 through December 31, 2025. Public Law 119-21, enacted July 4, 2025, ended the credit for expenditures made after that date. The IRS treats an expenditure as made when the original installation is completed, so a system finished in 2026 or later does not qualify, even if it was paid for in 2025. See the IRS FAQs on the 2025 law changes. This calculator therefore defaults the federal credit to 0%. Enter a percentage only if a credit still applies to your situation, such as unused credit carried forward from a 2025 installation. This is not tax advice.
Where the defaults come from
Installed cost defaults to $3.60 per watt, the median upfront price Lawrence Berkeley National Laboratory reported for host-owned, stand-alone residential systems installed in 2025, in 2025 dollars and before incentives, in the U.S. Distributed Solar and Storage Data: 2026 Update (August 2026). Cash buyers typically paid less; loan-financed systems, which may include dealer fees, typically paid more. Replace this with the price on your quotes.
Electricity prices default to each state’s average residential price, in cents per kilowatt-hour, from the U.S. Energy Information Administration’s Electric Power Monthly, Table 5.6.A, for August 2026, released October 23, 2026. EIA marks 2026 figures as preliminary. Your bill rate can differ from the state average.
Production defaults were computed on November 12, 2026, for one representative city in each state, using the European Commission Joint Research Centre PVGIS v5.2 API. The weather source is NREL’s National Solar Radiation Database (PVGIS-NSRDB, typical years 2005–2015), except Anchorage, Alaska, where PVGIS uses ERA5 (2005–2020) because NSRDB coverage does not extend there. The run assumes 1 kW of crystalline-silicon capacity, 14% system losses, a building-mounted array, a 20° tilt, and a south-facing orientation. We intended to use NREL PVWatts v8 directly; the PVWatts API was unreachable from the build environment, so this documented PVGIS-NSRDB run is the fallback. The assumptions, cities, and figures are stored in solar-data.json. Your roof, shade, and equipment will differ, so edit the production figure if you have a site-specific estimate.
Disclaimer
Estimates only; not tax, legal, or financial advice, and not a quote from an installer. Quiet Lark Studio is not affiliated with the IRS, EIA, NREL, LBNL, the European Commission, any utility, or any public utility commission. Actual production, compensation for exported power, incentives, and costs vary by site, utility tariff, and tax situation. Confirm current incentives, net-metering or net-billing rules, and installer quotes before you buy or sign a contract.
Affiliate disclosure
The Department of Energy guide linked on this page is a government resource, not an affiliate link. Some other pages on this website contain affiliate links; if you use one and later sign up for a product or service, Quiet Lark Studio may earn a commission at no extra cost to you.